|
|
|
|
|
RUBBER BDS FITTING INSTRUCTIONS
Copyright Notice Please note that, unless stated otherwise, the copyright to all material presented on this website is the property of AWS Trading. We rigorously protect our rights under UK Copyright Law and will actively pursue any infringements.
Please read fitting instructions carefully before attempting to fix your Rubber BDS.
 |
1
Place the Rubber Bottom Door Strip against the internal base of the door and mark the width of the door onto the Strip. |
 |
2
Cut the Rubber Bottom Door Strip to the exact door width. Position the excluder at the bottom of the door on the inside, ensuring the door is closed and the rubber is touching the raised threshold along its length. |
 |
3
Mark off the fixing holes with a pencil and using a bradawl start holes in the door base. Affix the Door Strip using the screws provided. |
TOOLS REQUIRED
Pencil, small hacksaw, screwdriver, bradawl.
Please Note: All work is undertaken at your own risk.
|
|
|
|
|
| | | | | | | | |
|
|
|
Website by
Better Websites, Southport
Copyright © AWSTrading.co.uk. All rights reserved.
|
|
|
|
|