Henderson PREMIER Canopy Cone and Cable Set - Fitting Instructions

• Using toggle bar or screwdriver in plug A, rotate shaft to ease spring pressure
• Insert crook pin into right hand head bracket (1) and secure door within openings
• Remove side jamb channels (2) and head bracket bolts (3)
• Remove door arms (4) from head bracket and door by withdrawing split pins (5)
• Detach free crimped end of cable (6.) from roller spindle clip (8)
• Remove and discard cables and cones by driving hollow pin (7) from cone and shaft, using a hammer
• Replace cones ensuring that white cone is on the left hand side and black cone on the right hand side
• Ensure that cones are correctly fitted by checking that cable fixing points on cones are aligned with each other
• Fix cones using new hollow pins and` hammer
• Refit the spring assembly and head brackets then replace door arm jamb channels by reassembling in reverse order
• Refit new cable by clipping into cone and roller spindle clips (8)
• Ease spring pressure using toggle bar and remove crook pin
• Allow spring to take up slack, ensuring that cables are in the outer groove, run down behind the cone and that roller spindle clips (8) are in position, as shown

Please Note: All work is undertaken at your own risk.